精密管订制

山东大鼎钢管厂精密无缝钢管是采用冷拔或冷轧工艺生产的高精度、高亮度的无缝钢管。内外径可细化弯曲强度和扭转强度相同时，重量轻。精密无缝钢管用于精密机械结构、轴承液压、机械加工、液压设备、钢套管。广泛用于汽车、摩托车、电动汽车、石化、电力、船舶、航天、轴承、气动元件、中低压锅炉无缝钢管。加强对精密钢管焊工基本技能的培训无缝精密钢管价格，根部不熔合缺陷；注意层间修整，避免槽带不当导致不熔合；严格按照要求，合理使用。山东大鼎金属材料有限公司Adjust the current and correctly handle the grinding angle and welding retention time of tungsten wire. Precision steel pipe has the characteristics of high dimensional accuracy, high surface finish, no oxide film on the inner and outer surface of the pipe after heat treatment, flat and crack-free pipe, cold bending deformation, high pressure resistance, etc. It can be used for various complex deformation and mechanical processing. CAL deep processing. The difference is that the main feature of seamless steel pipe is no welded joints, which can withstand greater pressure. The products can be rough castings or cold parts.

山东大鼎金属材料有限公司Precision seamless steel pipe (cold-drawn and cold-rolled) has high precision, no oxidation coating inside and outside the pipe, smooth and smooth surface, uniform wall thickness, high precision, small diameter of thin-walled tube to ensure that the error of the outside diameter of the tube in the inner and outer surface of the pipe presents varying degrees and quantities of corrugated ring marks, some are continuous, some are intermittent, may be the entire circle, there are. Not the whole circle. poor quality of pickling and lubrication, increase and change of friction during drawing, mechanical properties of steel pipe in length direction after heat treatment are not consistent, mandrel length and fineness are too large, and the position of mandrel before.

山东大鼎钢管厂拥有台大中型冷拔机、两台辊底热处理炉、台大中型穿孔机和台热轧钢管机组三套先进的生产设备和成熟的生产工艺。公司拥有现代化的科研中心，拥有强大的性能测试、工艺性能测试、涡流测试、超声波测试、水力测试、金相测试、高精度碳硫分析等一整套测试方法，并拥有一批高素质的技术人员和检查员。硬度试验是根据规定的条件将硬质压头缓慢压入试样表面，然后测试压痕深度或尺寸，从而确定材料的硬度。